Змазка літієва Greasen EP-23 з MoS2 (молібденом) 800г
Description
Greasen EP-23 is a complex lithium grease containing molybdenum disulfide (3%). It is resistant to moisture, water vapor, as well as weak acids and alkalis. The grease retains its properties even under the influence of vibrations, high pressure and shock loads.
Application
Greasen EP-23 grease is used for lubrication of highly loaded friction units operating in the temperature range from -30°C to +140°C. It is recommended for use in places with frequent changes in direction of movement or a combination of low speeds and high loads, for example, in equal angular velocity joints.
Standards, tolerances, specifications
✔ DIN 51 502: KPF2N-30
✔ ISO 6743-9: CDEB-2
Characteristics
✔ Penetration at 25°C after mixing (mm/10): 286
✔ Dropping point (°C): 203
✔ Lubricating properties (welding load, kg): 320
✔ Oxidation resistance (pressure drop after 100 hours of heating at 135°C, MPa): 0.012
Attention! The given physicochemical parameters are typical values. The actual values are specified in the quality certificates attached to each batch of the product.
Application
Greasen EP-23 grease is used for lubrication of highly loaded friction units operating in the temperature range from -30°C to +140°C. It is recommended for use in places with frequent changes in direction of movement or a combination of low speeds and high loads, for example, in equal angular velocity joints.
Standards, tolerances, specifications
✔ DIN 51 502: KPF2N-30
✔ ISO 6743-9: CDEB-2
Characteristics
✔ Penetration at 25°C after mixing (mm/10): 286
✔ Dropping point (°C): 203
✔ Lubricating properties (welding load, kg): 320
✔ Oxidation resistance (pressure drop after 100 hours of heating at 135°C, MPa): 0.012
Attention! The given physicochemical parameters are typical values. The actual values are specified in the quality certificates attached to each batch of the product.
Specification
Item
GreasesReviews (0)
Question-answer
Similar products
Viewed data products

Українська
Русский
English