10W-30 Agro Utto Oil 10W30, 5l

general characteristics
High quality multifunctional hydraulic transmission oil. A modern, unique composition of specially selected mineral base oils and additional additives ensures that modern design requirements of agricultural equipment manufacturers are met.
Also, the oil has anti-wear, anti-corrosion action and compatibility with various sealing materials.

Application
ORLEN OIL AGRO UTTO 10W-30 is intended for the lubrication of various types of gears used in agricultural machinery (gearboxes, main gears, steering gears, differential mechanisms), as well as for transmissions, including those for wet brakes, heavily loaded hydraulic systems, subject to the instructions agricultural machinery manufacturers.

Standards, approvals, specifications
Fulfills the requirements:
Zalecany do stosowania w maszynach rolniczych URSUS;
Ford M2C86B,C;
Ford M2C134D;
Case New Holland MAT 3525,MAT 3526;
John Deere JDM J20C, J20D;
Massey Ferguson CMS M1135, M1143, M1145;
J.I Case MS-1204,6,7,9
Allison C4,
VOLVO CE WB 101,
Caterpillar TO-2,
JCMAS HK P-041,
Sperry Vickers/Eaton: M2950S,
Sperry Vickers/Eaton: I-286-S,
Parker (Dennison UTTO)
HF-1, HF-2,
Sauer Sunstrand/Danfoss: Hydrostatic Trans Fluid

Physiochemical properties
Properties Units Typical values
viscosity grade SAE - 10W-30
kinematic viscosity at temp. 1000C mm2/s 10.2
structural viscosity at temp. - 250C MPaˇs 6 800
viscosity index - 138
total base number TBN mg KOH/g 8.6
flash point 0C 240
pour point 0C -27
water content % (V/V) does not contain
corrosion test at temp. 1000C for 3 hours on copper plates corrosion degree 1
Attention: The above given values ​​of the physico-chemical properties are typical values. The actual values ​​are given in the quality certificates attached to each batch of product.

Your Name:

Advantages:

Недостатки:

Your Review

Note: HTML is not translated!

Evaluate the publication:

Send your feedback